• Outdoor luminaire for installation on wall or on post.
• Configuration: die-cast aluminium structure . EN AB-47100 alloy (low copper content).
• Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Tempered transparent glass or lens with silkscreen border. Moulded silicone gaskets.
• Leo 160 / Leo 160 LED, Leo 120 on post / Leo 120 LED on post, Leo 160 on post / Leo 160 LED on post: Glass and lens fixed to the aluminium body through a robotic gluing system.
• Protection Rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: I
• Leo 80 / Leo 80 LED: Installation: wiring through a cable holder (5<ø<9mm cables). For watertightness to be assured the use of a multicore cable is mandatory, the use of single unipolar cables is not allowed.
• Leo 160 / Leo 160 LED, Leo 120 on post / Leo 120 LED on post: Installation: wiring through two cable holders (8<ø<13mm cables). For watertightness to be assured the use of a multicore cable is mandatory, the use of single unipolar cables is not allowed.
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Italy