• Bollard for outdoor installation on floor.
• Configuration: Extruded aluminium body, aluminium base with 15 micron anodizing for high resistance to corrosion. Methacrylate diffuser. Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: III
• Installation: Lambda LED/Kappa LED are equipped with a piece of neoprene cable for an easy-to-make connection Lambda/Kappa are equipped with a dc/dc highly efficient resin-coated converter that removes electromagnetic interference and allows parallel wiring. Lambda/Kappa are protected against polarity reversal and sudden voltage peak.
• Installation requires a 24Vdc remote power supply.
• Parallel wiring.
• The luminaire is supplied with a 2-way terminal block for 3-conductor cables - IP68
Italy
