• Wall light for installation outdoor.
• Configuration: turned aluminium body (EN AW 6060 alloy) 316L stainless steel fixing bracket.
• Double layer coating for high resistance to corrosion: The aluminium components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Methacrylate diffuser fixed to the body by a double-sided tape.
• Unidirectional and Bidirectional versions.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: III
• Installation: Gamma is equipped with a piece of PUR cable for an easy-to-
make connection (please provide effective insulation on the connection). Gamma is protected against polarity reversal (the luminaire does not switch on) and sudden voltage peak.
• Installation requires a 24Vdc remote power supply.
• Parallel wiring.
• We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
Italy