• LED bollard for installation outdoor
• Configuration: die-cast aluminium structure. EN AB 47100 alloy (low copper content)
• Double layer coating for high resistance to corrosion: The low copper Aluminium alloy is painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Transparent polycarbonate diffuser and expanded neoprene gaskets
• Protection Rating: IP66
• In compliance with EN60598-1 standards
• Class of insulation: I
• Installation: the luminaire is equipped with two EPDM cable glands (8<ø<13mm cable). Outdoor use requires suitable flexible cables assuring the watertightness of the cable gland. Direct screwing on a solid surface or ground fixation through base plate and bolts (to be ordered separately).
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
537001
COOL WHITE 6000K
MID-POWER LEDs
10W/220÷240V
Total power 11W
LED lm 1200 ≠ FIXT lm 1052
CRI >70
537002
NATURAL WHITE 4000K
MID-POWER LEDs
10W/220÷240V
Total power 11W
LED lm 1100 ≠ FIXT lm 964
CRI >80
537003
WARM WHITE 3000K
MID-POWER LEDs
10W/220÷240V
Total power 11W
LED lm 1050 ≠ FIXT lm 921
CRI >80