• Square luminaire for outdoor installation on wall or ceiling.
• Configuration: turned aluminium body ( EN AW 6060 alloy ) 316L stainless
steel fixing bracket.
• Double layer coating for high resistance to corrosion: The aluminium
components are painted with a double coat using powders which are complaint with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents).The entire painting process of the aluminium fitting starts from components which have been sand-blasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
• Methacrylate diffuser with silkscreen finishing, fixed to the body by silicone glue.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: III
• Installation: Beta is equipped with a piece of cable for an easy-to-make
connection (please provide effective insulation on the connection).
• Beta is protected against polarity reversal ( the luminaire does not switch
on ) and sudden voltage peak.
• Installation requires a 24Vdc remote power supply.
• Parallel wiring.
• We recommend the use of a connection system with a protection degree
greater than or equal to the protection degree of the luminaire
Colors
1. White
2. Aluminium
3. Anthracite
4. Black
9. Rust-red
506001
COOL WHITE 6000K
LOW POWER LEDs 3W/24Vdc
Total power 3W
LED lm 225 ≠ FIXT lm 74
CRI>70
506002
NATURAL WHITE 4000K
LOW POWER LEDs 3W/24Vdc
Total power 3W
LED lm 225 ≠ FIXT lm 74
CRI>80
506003
WARM WHITE 3000K
LOW POWER LEDs 3W/24Vdc
Total power 3W
LED lm 158 ≠ FIXT lm 54
CRI>80
Italy