295
Perseo9
PERSEO 9
65
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
EU Regulation 874/2012 - Illumination equipment energy classes
• Adjustable projector for installation on wall, on pole /
bracket or on floor.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content). Glass diffuser: extra-clear
or sandblasted, fixed to the aluminium frame through a
robotic gluing system.
• Double layer coating for high resistance to corrosion: the
aluminium components are painted with a double coat
using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sand-blasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN60598-1 standards
• Class of insulation: I
• Installation: the luminaire is equipped with 2000mm
cable for an easy-to-make connection. The bracket / pole
is supplied with a 2-way terminal block for 3-conductior
cables – IP68.
• We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
Protection against
impact.
IK 06 - 1,00 joule
Floor installation
Wall fitting
Installation on pole
Pre-wired with approx
2000mm of cable.
LED VERSION:
Class A / A+ / A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
