159
Alice
65
ALICE
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
FLUORESCENT VERSION:
Class A
TC-DEL/G24q-2
A
FLUORESCENT VERSION:
Class A/B
TC-D/G24d-3
A
B
HALOGEN VERSION:
Class D
QT32/E27
D
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
Recessed wall fitting.
Protection against
impact.
IK 08 - 5,00 joule
Remote device required.
The fitting is equipped
with 2 cable input.
• Rectangular luminaire for installation in the wall �
recessed.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content). Glass diffuser: sandblasted.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: I, LED module: I, III
• Installation: wiring through two M16 plastic cable glands
(4,5<�<10mm) placed on the back side of the fitting.
Outdoor use requires suitable flexible cables assuring the
watertightness of the cable gland. Installation requires a
dedicated box to be ordered separately.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
HALOGEN VERSION:
Class D
QT32/E27
FLUORESCENT VERSION:
Class A
TC-DEL/G24q-2
FLUORESCENT VERSION:
Class A/B
TC-D/G24d-3
