153
CAMILLA
Camilla
65
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
A++
A+
A
FLUORESCENT VERSION:
Class A
TC-SEL/2G7
A
EU Regulation 874/2012 - Illumination equipment energy classes
LED VERSION:
Class A/A+/A++
Luminaire supplied
with integrated LED modules
that cannot be replaced
.1 White
.6 Grey
.3 Anthracite
.18 Deep Brown
.4 Black
Recessed wall
fitting.
The fitting is
equipped with
2 cable input.
Protection against
impact.
IK 08 - 5,00 joule
Remote device.
• Rectangular luminaire for installation in the wall –
recessed.
• Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content). Glass diffuser: sandblasted with
silkscreen border, fixed to the aluminium structure through
a robotic gluing system.
• Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
• Protection rating: IP65
• In compliance with EN 60598-1 standards
• Class of insulation: mains: I; LED module: I, III; RGB: III
• Installation: Electrical components housed into the
removable back side. Wiring through two M16 cable glands
for (4,5<ø<10mm cables). Outdoor use requires suitable
flexible cables assuring the watertightness of the cable
gland. Installation requires a dedicated box to be ordered
separately.
• During the installation and the maintenance of the fixtures
it is important to be careful and avoid damages on the paint
coating.
Damages on the coating exposed to outdoor conditions or
water, could cause corrosion.
Chemical substances affect the anticorrosion covering
protection.
FLUORESCENT VERSION:
Class A
TC-SEL/2G7
