surface | recessed
48V | max 2 metres in one piece | ON-OFF | DALI
Extremally thin | can be safely installed on walls
Requires 48V power supply
A delicately designed track system with
compact dimensions. The recessed
version creates a narrow slit in the finished
suspended ceiling, measuring just 11
millimeters in width.
The surface-mounted model is only about
2 centimeters wide and 1 centimeter high.
It allows for transitions from the wall to the
ceiling.
This is a low-voltage system operating at 48V,
which requires the use of a power supply.
surface | suspended | recessed
48V | max 3 metres in one piece | ON-OFF (one or two
circuits) | DALI | can be safely installed on walls | requires
48V power supply
A higher version of the MULTITRACK
system, retaining all its advantages. It utilizes
the same electrical accessories and allows
for transitions from the ceiling to the wall.
Due to its increased depth of the HIGH
MULTITRACK system, linear luminaires
fit seamlessly within the track, and the
adapters and electrical connectors become
nearly invisible. This creates an elegant,
uniform line.
Like any low-voltage system, HIGH
MULTITRACK requires an appropriate
power supply and electrical connection.
3F surface | 3F recessed |
DALI surface | DALI recessed
230V | max 3 metres in one piece | ON-OFF (three circuits) | DALI
surface
48V | max 3 metres in one piece | ON-OFF
Extremally thin | can be safely installed on walls
Requires 48V power supply | DALI version coming soon
FLATTRACK is the flattest of all AQForm
lighting track systems. The copper wires are
coated with graphite, giving them a colour
similar to the black of the track itself. By
running them along the sides of the track,
the most visible surface remains flat and
elegant. A wide selection of connectors
allows for creating elaborate track
configurations.
FLATTRACK is a low-voltage track system
(48V). It can be used on walls, within arm’s
reach. It requires a power supply.
surface | suspended | recessed
48V | max 2 metres in one piece | ON-OFF (one or two
circuits) | DALI | can be safely installed on walls | requires
48V power supply
System based on small-sized lighting tracks
with a very simple form. Available accessories
and connectors allow for creating elaborate
configurations, including transitions from the
ceiling to the wall.
Inside the track rail, a safe 48V voltage is
used, making the MULTITRACK system
suitable for locations within arm’s reach. It
requires a separate power supply. The system
offers various control options, including
two independent circuits using two power
supplies and Casambi or DALI control.
MICROTRACK
HIGH MULTITRACK
3F and 3F DALI
FLATTRACK
MULTITRACK
48.4
16.5
max 60Vdc
Data BUS
25
26.2
28,7
max
60Vdc
Data BUS
26.2
54
max
60Vdc
Data BUS
74
54
max
60V dc
Data BUS
18
6,7
19.4
49
11.2
15.2
12.9
max 60V dc
Data BUS
19
11.2
10.2
max 60V dc
Data BUS
56
33.5
31
N
L1
L3
L2
56
33.5
34.3
N
L1
L3
L2
D
D
33.5
32.5
N
L1
L3
L2
33.5
34.5
N
L1
L3
PE
D
D
L2
The most popular system powered by 230V. To
connect it, a standard cable on the ceiling and
a power end cap or one of the connectors with
the possibility of power connection (straight
connector, “L”, “T” or “X”) are sufficient. 3F
tracks allow the luminaires to be divided into
three circuits, so that they work independently.
This requires running a 5-wire cable between
the switches on the wall and connecting the
track.
There is also a DALI 3F version available for
indoor use with a wired digital control system
based on the DALI protocol.
7
6
