29
INTRUSION DETECTION
The SB is equipped with an advanced-intrusion detection system for the protection of valuables and a coercion-attack/panic-alarm
system for personal defense. The unit works in standalone mode but can easily be interfaced to an existing intrusion-detection
system, with previously installed sensors.
The central control unit is set for sending text or voice messages, in case of need, to report any danger or threat to a remote
location, while an audible alarm is triggered locally.
Number of terminals supported by the system
50
Number of terminals available for mapping and relocation
50
Terminals on motherboard (configurable as inputs or outputs) *
10(5)
Programmable relay on motherboard
1
Number of programmable open-collector outputs on motherboard
2 (500mA)
Number of partitions available
10
IP Connectivity management (using SmartLAN)
YES
Flex5 expansion board housing
YES
GSM device housing
YES
Power supply
3A
RS232 Port
YES
Power charge monitored by temperature probe (ProbeTh accessory item)
YES
Battery test circuit
YES
Control-panel firmware upgrading capability
YES
Peripheral-firmware upgrading capability via control panel
YES
Enclosure
Metal
Battery housing
7Ah
Dimensions (HxWxD)
305x220x80mm
28
PROFINGER READER
Opening is automated by a biometric control system that reads fingerprints to open doors and operate both alarms and lights.
When a user goes out, lights go off and the alarm system is activated.
If a different finger is used, silent alarm can be sent out, if the person is under threat.
For system extension, the ProFinger product range allows multiple readers to be bus-connected for the management of all system
devices within the network by access control functions including transit log, time range setting and advance user or user-group
management.
PROFINGER READER TECHNICAL DETAILS
High-quality optical sensor
Area scanner
16x19 mm
Image size
272x320 pixels
Image resolution
500 dpi
Number of users
955 (1910 fingerprints)
Identification time 1:1000 760 ms
Recording time
600 ms
EER
0.001
FAR (default)
1/1,000,000 with FRR=1.3%
Self-learning feature
A keypad and a buzzer for stand-alone user management
A feedback LED for reader status indication (with a remote board only)
MOSFET output
max load 1A (open collector negative switching)
1 BUS RS485
Power supply
12Vdc / allowed range 19-14Vdc
Consumption at 12 Vdc
typically 95 mA / 110 mA max
