486
487
Accesories / Accesorios
486
487
REMOTE CONTROL | MANDO A DISTANCIA
MULTICANAL
By installing our DALI receiver, we can control our DALI luminaires with this multi-channel control; this control can control
up to 4 groups of luminaires, and can also be linked to infinite receivers, and control with a single control all the luminaires
desired (as long as a signal is received). It also has 3 memory positions capable of storinzg diferent configurations between
groups. No additional installation is required, i.e. a standard two-wire on/of installation can be used; the receiver is
responsible for generating the DALI bus. It is also possible to control the luminaire from a push button by running an extra
cable to the luminaire. One receiver is required for each luminaire.
Instalando nuestro receptor DALI, podemos controlar nuestras luminarias DALI con este mando multicanal; este mando
puede controlar hasta 4 grupos de luminarias, y además se puede vincular a infinitos receptores, y controlar con un único
mando todas las luminarias que se deseen (siempre que se reciba señal). También dispone de 3 posiciones de memoria capaz
de almacenar distintas configuraciones entre grupos. No se requiere una instalación adicional; es decir que podemos usar
una instalación on/of estándar de dos cables; el receptor se encarga de generar el bus DALI. También se podrá controlar
la luminaria desde un pulsador haciéndole llegar un cable extra a la luminaria. Se necesita un receptor por cada luminaria.
MEASURES | MEDIDAS: 120 x 55 x 17 mm
SIGNAL (RF)
S1
S2
S3
XCONTROL001
MONOCANAL
By installing our DALI receiver, we can control our DALI luminaires with this mono channel remote control. This option does
not require an additional installation; that is, we can use a 2 wires standard on/of installation. The receiver is responsible for
generating the DALI bus. Also, the item can be controlled by a push switch by adding an extra wire. Please use one receiver
per item.
Instalando nuestro receptor DALI, podemos controlar nuestra luminarias DALI con este mando mono canal. No se requiere
una instalación adicional; es decir que podemos usar una instalación on/of estándar de dos cables; el receptor se encarga
de generar el bus DALI. También se podrá controlar la luminaria desde un pulsador haciéndole llegar un cable extra a la
luminaria. Se necesita un receptor por luminaria.
MEASURES | MEDIDAS: 141 x 35 x 8,5 mm
SIGNAL (RF)
S2
S1
XCONTROL021
RECEIVER Remote Control | RECEPTOR mando a distancia
By installing this receiver in a luminaire (without power limitation), we can control our DALI product with RF signal (remote
control). The receiver requires direct 230V AC power supply and generates the DALI signal that communicates with the
driver, so that no additional cables are needed in the installation.
To be able to switch on, of and dim from the wall and in a switched manner with the remote control, an additional cable
must be installed up to the luminaire and the switch must be replaced by a push button; this is how to install for optimal
functioning if dimming is also desired from the wall. One receiver can support up to 8 remote controls.
Instalando este receptor en una luminaria (sin limitación de potencia), podemos controlar nuestro producto DALI con señal
RF (control con mando). El receptor requiere alimentación directa 230V AC y genera la señal DALI que se comunica con
el driver, de modo que no se necesitan cables adicionales en la instalación. Para poder encender, apagar y regular desde la
pared y de manera conmutada con el mando, hay que instalar un cable adicional hasta la luminaria y cambiar el interruptor
por un pulsador; esta instalación es la más recomendable para su correcto funcionamiento si se quiere regular también
desde la pared. Un receptor puede soportar hasta 8 mandos.
MEASURES | MEDIDAS: 76.5 x 51 x 25 mm
SIGNAL (RF)
XDRVPART008